Viega

Reduser- gunmetal- R-gjenge, Rp-gjenge- rundR: 38, Rp: 12

Easytop Ball valve with SC-Contur- press connectorsComponentsValve casing gunmetal or silicium bronze according to DIN 50930-6 / DIN EN 1982, maintenance-free selector shaft, actuation lever T-form with medium marking green/red exchangeable, stainless steel ball, EPDM sealing elements.Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 110 °Cwith DVGW-test markDN: 20, d: 22

Reduksjon for kjøkkenvaskavløp i hvit plast

Kobling- gunmetal- Rp-gjengeRp: 34

Long nipple- gunmetal- R-threadR: 34, L: 40

Avløp og luktfeller i henhold til DIN EN 274 for vasker og bideter - designversjoner og tilbehør. Høykvalitets byggeteknologi med enkel montering. Visign universelle og spalteventiler med åpen eller klikklukking. Plassbesparende luktfeller for skjult eller pre-veggmontering. Designversjoner. Flaskeluktfeller eller rørluktfeller laget av messing eller plastikk.Tilbehør for spesielle installasjonssituasjoner.

Adapter - gunmetal - loddet tilkobling, Rp-gjenge d: 22, Rp: 34

Gemini monteringsenhet - Loddingstilkobling, Rp-gjenger Komponenter - kort messingbue, galvanisert stål (flate) monteringsbrakett d: 15 mm, Rp: 12, dybdemåler: 150 mm

Sanpress Inox Adapter with SC-Contur- steel non-corroding- press connection, R-threadComponentsEPDM sealing element, polygon, VdS certificationd: 22, R: 1

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Røroppfanger - for vask - plastkomponenter Avløpsalbue 45°, tilkobling for avløpsslange Kvalitetskontrollert i henhold til DIN EN 274 G: 112, DN: 50

Reduksjonsnippel - gunmetal - R-gjenge

Viega 2218

Press connector system with press connectors and pipes made of copper in acc. with EN 1057 and DVGW worksheet GW 392 suitable for:•Gases in acc. with DVGW G 260 in gas installations in acc. with DVGW-TRGI 2008 (DVGW worksheet G 600) / DVFG-TRF 2012•Liquid gas in the gas phase for domestic and commercial applications, tested in acc. with DVGW worksheet G 5614•Heating oil pipelines for heating oil in acc. with DIN 51603-1•Diesel fuel pipelines for diesel fuel, as suction and pressure pipelines in acc. with EN 590 in consideration of the general technical approval Z-38.4-71Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet G 5614, point 4.4.1, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingYellow dot, yellow rectangle and inscription »Gas MOP 5 / GT1«Sealing elementsHNBR, yellowDimensions/MaterialStandard sizes: d 12, 15, 18, 22, 28, 35, 42, 54 made of copperXL sizes: d 64.0 made of copperPress connectors with threaded connection d 12–54 made of gunmetalXL press connectors with threaded connection d 64.0 made of copperAreas of applicationNatural gas/Liquid gasHeating oil/Diesel fuel (d 12–54)NoteOnly Viega copper and gunmetal press connectors, which are marked with a yellow rectangle and have the inscription »Gas MOP 5 / GT1« are permitted for use in installations for gas, heating oil and diesel fuel systems!Use of the system for application areas and media other than those described here must be agreed with Viega Service Center through a material request.Operating conditionsGas and liquid gas systems•Operating temperature -20 °C up to +70 °C•Operating pressure max. 0.5 MPa•Operatin

Pipe odour trap - for sink - plastic Components Drain elbow 45°, 2 waste water hose connection Quality controlled in accordance with DIN EN 274

Raxofix Adapter with SC-Contur- for all Viega metallic systems- silicium bronze- press connectorsComponentsEPDM sealing elementd1: 25, d2: 22

Viega 1115.1

Viega 2316

Raxofix T-stykke med SC-Contur- silisiumbronse-trykkontakter d1: 16, d2: 16, d3: 16

Slange skrufitting 45° for 2 avløpsslange tilkoblinger. Materiale: hvit plast

Viega 2217.2

Profipress Cap with SC-Contur- copper - press connection Components EPDM sealing elements

Long nipple- gunmetal- R-thread

Sanpress Inox XL Reducer with SC-Contur- steel non-corroding- plug-in end, press connectionComponentsEPDM sealing element, cutting ring, separator ring, VdS certification d1: 76.1, d2: 54