Komponenter for switchboxes og skap - side 5

Schneider Electric iC60 RCBO strømkretsbryter 4P

Schneider Electric iRO Enkel tone

Siemens 5SL6520-7 strømkretsbryter Miniatyr-automatsikring 2

LC1D12P7 is a 3-pole TeSys D contactor from Schneider Electric for motor applications up to 5.5kW@400V. It includes a 230V 50/60Hz AC coil and 1NO+1NC built-in auxiliary contacts, it can be used in safety applications thanks to its certified NC mirror contact. Compact, DIN-rail mounting, it procures high reliability and durability. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Compact product, 45mm wide, for DIN-rail and panel mounting. Clear separation between power and control circuits, easy front access to coil and auxiliary contacts connections . Equipped with a 230V AC coil that can be supplied at 50Hz or 60Hz. Provides 2 built-in auxiliary contacts 1NO + 1NC, NC is a certified mirror contact suitable to be included in the control of safety systems. High electrical durability, guaranteed for 2 million cycles at 12A AC-3 440V, for demanding motor switching applications. Robust design with high making and breaking capacities up to 20 In. Connections by screw clamp terminals

AF09 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available. Note: AF..-30-..-11 not suitable for a direct control by PLC-output. AF..-30-..-11 contactor type available in some countries: please consult your ABB representative.

Sett med 4 koblinger 100A dobbel terminal

PowerTags er energisensormoduler for 1P + N, 3P og 3P + N nettverk. De monteres direkte på enheter i iC40-serien med modulbredde på 18 og 54 mm opptil 63A, og R9 Flex med en ledning på 15 cm for måleenheten. Kombinert med FESB Facility Expert Small Business via radiofrekvenskommunikasjon Zigbee, måler PowerTag-sensorer kWh-verdien i samsvar med IEC-standarden 61.557-12. Akkumulert aktiv energiforbruk i kWh.

GV2ME08 is a TeSys GV motor circuit breaker from Schneider Electric designed for motor applications 1.1-1.5kW@400V. It fulfills a thermal-magnetic protection with a thermal setting range 2.5-4A, magnetic tripping at 12xIn and high breaking capacity Icu 100kA@400V. Start-stop control by push-button guaranteed for 100 000 cycles AC-3 415V. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Complete motor protection in a single device : short-circuit, overload, disconnection. Associated with a TeSys contactor, it ensures a complete type 1 or type 2 Motor Starter solution . Light and compact, 45mm wide, for DIN-rail and panel mounting. Manual control with push-buttons for Start / Stop, padlockable. Possible mounting of auxiliary contacts front or side mounted (GVAE, GVAN, GVAD) for status and tripping signalling. For large industrial or building LV distribution networks thanks to a high 100kA breaking capacity. Power connections with screw clamp terminals, also available with springs and lugs terminals. Can be associated with undervoltage or shunt tripping units (GVAU, GVAS) and power distribution busbars (GV2G)

GV2ME16 is a TeSys GV motor circuit breaker from Schneider Electric designed for motor applications 5.5kW@400V. It fulfills a thermal-magnetic protection with a thermal setting range 9-14A, magnetic tripping at 12xIn and breaking capacity Icu 15kA@400V. Start-stop control by push-button guaranteed for 100 000 cycles AC-3 415V. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Complete motor protection in a single device : short-circuit, overload, disconnection. Associated with a TeSys contactor, it ensures a complete type 1 or type 2 Motor Starter solution . Light and compact, 45mm wide, for DIN-rail and panel mounting. Manual control with push-buttons for Start / Stop, padlockable. Possible mounting of auxiliary contacts front or side mounted (GVAE, GVAN, GVAD) for status and tripping signalling. For industrial or building LV distribution networks thanks to a 15kA breaking capacity. Power connections with screw clamp terminals, also available with springs and lugs terminals. Can be associated with undervoltage or shunt tripping units (GVAU, GVAS) and power distribution busbars (GV2G)

MS116-16 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 16.0 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 16 kA at 400 VAC and the trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

Motorvernbryter, 3p, Ir=4-6.3A, skruforbindelse

iC60H - miniatyrkretsbryter - 1P + N - 10A - C-kurve

This Resi9 is a modular residual current breaker with overcurrent protection (RCBO). It is a 1P+N circuit breaker with 1 protected pole and 16A In rated current and C tripping curve. The earth leakage protection class is A type with a sensitivity of 30mA. The earth-leakage protection time delay is instantaneous. The Icn rated short circuit breaking capacity is up to 6000A according EN/IEC 61009-2-1 standard. This product protects against short circuit, cable overload, electrical shock by indirect contact and fire hazards. It brings safety, reliable solution for commercial and industrial applications with high breaking capacity. This product is compliant with EN/IEC 61009-2-1 standard. It has an electrical endurance going up to 7500 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 230VAC. It is DIN rail mountable. The width in 9mm pitches is 4. The product color is white (RAL9003). The dimensions are (W) 36mm x (H) 82mm x (D) 70.5mm. The weight is 186g. It has an IP20 degree of protection (as per IEC/EN 60529 standard) and becomes IP40 once in modular enclosure. The operating temperature is from -25°C to -60°C.

Schneider Electric A9A15310 uttaksboks

Automatisk endring av sommer- og vintertid, 2 byttekontakter, dansk meny, 2 moduler for DIN-skinne M36

Rele, n-type med 2 normalt åpne kontakter for AC 230V 16A styring av AC 230V

Installasjonskontaktorer

[7825200114]

Schneider Electric TeSys GV2 strømkretsbryter 3

[7822530450]

Siemens 3RV2011-1EA10 strømkretsbryter 3P

Schneider Electric ABLM1A24025 strømforsyningstransformator

Schneider Electric GV2ME20 strømkretsbryter

Transformer FR 60B-40230 40VA Produktbeskrivelse: Enkeltfase isolasjonstransformatorer designet og produsert i henhold til EN61558-2-4 og gjeldende krav fra Det Norske Veritas, som blant annet krever en omgivelsestemperatur på maks. 45°C. CE-merket. FR-serien er designet for å møte stadig strengere krav til pålitelighet og levetid i ulike applikasjoner...

DC strømforsyning LF48-2DC 24VDC Produktbeskrivelse: Robuste og kompakte enfasestrømforsyninger uten RC-filter for 12 eller 24V DC med maks. 48% ripple RMS. Konstruert og produsert i henhold til EN61558-2-6 og CE-merket. Plastinnkapslet og støpt i selvslukkende polyuretan. Isolasjonsklasse II - dobbeltisolert. Strømforsyningene er...