Gulvvarme

Danfoss TWA-K termisk aktuator 24V NC. Termiske aktuatorer i TWA-K-serien brukes sammen med elektriske på/av-kontroller for å aktivere Heimeier-, MNG- og Oventrop-ventiler med M30×1,5-tilkoblinger. Andre ventiler og gulvvarmefordelerskap med M30×1,5-tilkoblinger kan også være kompatible

Used on Roth manifold in systems with Roth controlsystems

Danfoss 088U2121 termostat ZigBee Hvit

Roth Touchline standard romtermostat brukes til Roth Touchline kontrollenheter.

Danfoss 088U2122 termostat ZigBee Hvit

Danfoss Icon2™ Main Controller for underfloor heating control. Basic model, 24V, 15 circuits. With pre-installed TWA conversion module and DK adapter with ground. Installation, adjustment and handover take place easily with the Danfoss Icon2™ Commissioning App.

Danfoss Icon2 Antenne

Uponor Smatrix com. Pulse R-208 establishes connection between Uponor Smatrix Pulse system and smartphone/tablet and Uponor cloud remote/local access via Uponor Smatrix Pulse app (internet connection required)Functions: temporary wi-fi access point for direct access (if local wi-fi is not available) access via local wi-fi remote access via internet connection smart home ecosystem integration (Amazon Alexa, Google Home, IFTTT) over-the-air updates multi-home control smart alerts via Uponor Smatrix Pulse app third-party access for remote support (user allowance required) history trend analysis via Uponor Smatrix Pulse app timer programming comfort settings supply diagnostics secure encrypted connection to Uponor cloudContent: Uponor Smatrix com Pulse R-208 adaptor for DIN rail installations RJ45 connection cable (1.5m) first step instructions safety instructions mounting material conformity: CE / EAC power supply: RJ45 cable to Uponor Wave or Uponor Base controller Pulse ethernet interface: 10/100 Mbps (RJ45) ethernet protocols: Ethernet II protection class: Class II IP20 color: white

Danfoss Icon2™ Main Controller for underfloor heating control. Basic model, 230V, 15 circuits. Installation, adjustment and handover take place easily with the Danfoss Icon2™ Commissioning App.

Termostat med display, Uponor Smatrix Wave plus, er en trådløs enhet drevet av 1 x CR2032-batteri.

Denne Uponor-termostaten kombinerer trådløs drift med et tydelig display for Smatrix Wave plus temperaturkontroll.

• Uponor Smatrix Wave plus-modell
• Trådløs termostat med display
• Drevet av 1 x CR2032-batteri

Et praktisk valg for trådløs displaybasert styring i et Smatrix Wave plus-oppsett.

Roth actuator 230V with 2 m. cable. Used on Roth manifolds, shunt units, Minishunt etc.

Telestat Uponor Vario S er en lukket (NC) 24 V-enhet for kontroll- og reguleringsapplikasjoner.

Uponor Vario S-telestaten gir en tydelig match for systemer som krever en 24 V normalt lukket telestat.

En målrettet komponent for enkel integrasjon med Uponor Vario S-installasjoner.

Amplifier for Salus iT600 heating system ZigBee signal.

Energisparende termoelektrisk aktuator 1W, 230V, med adapter.

Energisparende termoelektrisk aktuator 1W, 24V, med adapter.

Kontrollenhet Uponor Smatrix Wave er en 230 V AC-kontrollenhet for styring og regulering av gulvvarme, levert som 8 stk.

Utviklet for bruk i gulvvarmesystemer, støtter denne Uponor Smatrix Wave-enheten sentral styring som del av et varmereguleringsoppsett.

• Uponor Smatrix Wave-kontrollenhet
• For gulvvarmesystemer
• 230 V AC
• Levert som 8 stk

Et praktisk valg for strukturert gulvvarmestyring med Uponor Smatrix Wave.

Salus 24V NC actuator for underfloor heating with 30mm nut, can be used for all 24V underfloor heating systems.

24V room thermostat for installation 80x80 with replaceable frames and touch display. Can be used with a floor sensor.

For de som ønsker å sette ønsket temperatur og se gjeldende temperatur. Funksjoner trådløse display-termostater • Temperaturområdebegrensning • Trådløs toveis kommunikasjon • Berøringsskjermkontroll • Ikonbasert navigering • Støyfri bryting • Batteridrevet (2 x 1,5V)

24V room thermostat for wall mounting with touch display. Can be used with a floor sensor.

Danfoss Icon Master Controller 24V with 10 channels. Underfloor heating control for the Danfoss Icon series with 10 outputs for thermal actuators. Up to 10 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

The THB23031 is an auto balancing actuator that is used to provide automatic balancing of your underfloor heating circuits. It has two temperature sensors that are connected to the UFH flow and return pipes (inlet and outlet of the UFH manifold). It will continuosly measure the temperatures and adjust the actuator position to maintain the correct temparatur differential between the manifold flow and return pipes (Delta T). This product has an IP54 rating means that the produkt will be protected against contamination from limited amounts of dust and other particles. Additionally, it will be protected from water sprays from all directions. ITG Dresden have confirmed that the Salus THB actuator is equivalent to the hydraulic balancing. In co-operation with ITG Dresden, The Salus THB actuator has been tested and improved. During independent testing it was confirmed that the installation of the Salus THB system in existing underfloor heating system will achieve the same results as a conventional balancing.

Termostat med dreieknapp for Uponor Smatrix Wave plus kombinerer trådløs drift med batteridrift for styring av gulvvarme.

Denne kontroll- og reguleringskomponenten er utviklet for bruk i gulvvarmesystemer og har et enkelt termostatformat med dreieknapp.

Et praktisk valg for enkel temperaturkontroll i et Uponor Smatrix Wave plus-oppsett.

Shunt with manifold, pump ex.

Quantum SQ610RF is a new smart room thermostat from SALUS. The appearance of the room thermostat is light and simple in a smart thin design. The room thermostat has a built-in rechargeable lithium battery and should not have any batteries changed. The SQ610RF is wireless and fits with a SALUS floor heating system or SALUS Smart Home system. When connected through SALUS Smart Home it is possible to monitor and change the thermostat settings from either PC, Smart Phone or tablet. SALUS Quantum SQ610RF offers the opportunity to increase comfort and reduce energy consumption.