Alu pex-systemer - side 2

PPSU-kobling Uponor 40X32 mm

PPSU-kobling Uponor 50X50 mm

45° Presbend PPSU Uponor 50 x 50 mm.

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 20, d2: 20, d3: 20

Raxofix Coupling with SC-Contur- silicium bronze- press connectiond1: 20, d2: 16

Raxofix kobling med SC-Contur - silisiumbronse - pressetilkobling d1: 16, d2: 16

Raxofix Adapter with SC-Contur- silicium bronze- press connection, R-threadd: 40, R: 114

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 25, d2: 16, d3: 20

Raxofix kobling med SC-Contur - silisiumbronse - trykktilkobling d1: 25, d2: 25

Geberit Mepla T-stykke, redusert: d=20mm, d1=16mm, d2=20mm

Geberit Mepla bøyeadapter 90° med hann-gjenge: d=40mm, R=1 1/4

Geberit Mepla albue: 45°, d=63mm

Geberit Mepla-adapter med kvinnelig gjenge: d=50mm, Rp=1 1/2

Geberit Mepla reduksjon: d=32mm, d1=20mm

Geberit Mepla T-stykke med hunngjenger: d=40mm, Rp=1, d1=40mm

Geberit Mepla T-stykke med hunngjenger: d=20mm, Rp=1/2, d1=20mm

Geberit Mepla-adapter med hann-gjenge: d=32mm, R=1

Geberit Mepla bøyeadapter 90° med hunngjenger: d=20mm, Rp=1/2

Raxofix Adapter with SC-Contur- silicium bronze- press connection, R-threadd: 16, R: 12

Geberit Mepla-adapter med kvinnelig gjenge: d=20mm, Rp=3/4

Raxofix T-stykke med SC-Contur- silisiumbronse-trykkontakter d1: 32, d2: 32, d3: 32

Raxofix kobling med SC-Contur - silisiumbronse - pressetilkobling d1: 32, d2: 32

Raxofix Coupling with SC-Contur- silicium bronze- press connectiond1: 25, d2: 20

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Kalibreringsverktøy HENCO (Kalispeed), 16 mm